British Columbia Class 1 Licence Test 11

List of questions (classic view)

1. Are post-trip vehicle inspections necessary?
2. During the pre-trip inspection, is it necessary to check the steps and handrails?
3. Which statement about cargo inspections is incorrect?
4. Can you change lanes while in an intersection?
5. What is not usually inspected when checking the landing gear of a trailer?
6. How do you verify that the bus parking brake is functioning properly?
7. When is the ideal moment to detect leaks or body damage on your bus?
8. Which vehicle types are not legally obligated to stop for a pre-hill inspection?
9. When you're inspecting each fluid during your pre-trip inspection, what are you NOT checking?
10. If you miss a brake pre-hill inspection, what might be the consequence?
11. Why should you walk counter-clockwise around your vehicle while doing a circle check?
12. Is it necessary to check the side and rear view mirrors during the vehicle inspection?
13. How much time should it ideally take to perform a pre-trip inspection for a class 4 vehicle?
14. Why is it crucial to carry out an en route vehicle inspection?
15. Which of the following is not usually performed when inspecting the vehicle's frame?
16. When conducting a pre-trip inspection on the brakes, what are you not required to check?
17. What does a white diamond painted on the road indicate?
18. Which lights on your vehicle require another person to assist in checking?
19. What is not usually checked during inspection of the lights?
20. After loading cargo, how soon should the securement system be re-inspected?
21. What are some of the checks performed during a pre-trip inspection of a bus with storage compartments?
22. How long does a typical pre-trip inspection for class 3 vehicles generally take?
23. Why should commercial vehicles have reflective markings in addition to the required lights and reflectors?
24. A commercial trailer whose overall width is ________ must have reflective markings on the rear and sides.
25. The NSC requires re-inspection on a regular basis during the trip at the earliest of which interval?
26. Which of the following isn't typically checked when inspecting a fifth-wheel connection?
27. Where would you usually find turn control signs?
28. When inspecting drive belts, what are you not looking for?
29. What course of action should you take if a brake check reveals unsafe brake operation?
30. Should construction signs and traffic control personnel be complied with, even if the laws state otherwise?
31. What does "turnout" refer to in road terminology?
32. What is the outcome if your brakes overheat?
33. What does a broken yellow line on the road represent?
34. Are you allowed to drive unregistered vehicles from industrial roads onto public roads?
35. Is it legal to drive over painted traffic islands?
36. What does a lane control signal provide information on?
37. What is the meaning of a green flashing circular traffic light?
38. What is meant by an off-highway endorsement?
39. What is a double yellow broken line an indicator of?
40. In road terminology, what defines an industrial road?
41. When driving towards an object marker sign, which side should you head for?
42. What is required of you when you approach a train crossing with flashing red lights?
43. What is expected of you when you approach a yield sign?
44. On a steep industrial road, which truck should be given the right-of-way?
45. How do industrial roads differ from public roads?
46. If the lane control signals above all lanes are flashing yellow, what should you do?
47. What are you allowed to do when a flashing green arrow with a solid red light is displayed?
48. What purpose does water serve in some commercial vehicles' brakes?
49. Is it permissible to cross a solid white lane marking?
50. Is it common for industrial roads to have runaway lanes?

1. Are post-trip vehicle inspections necessary?
2. During the pre-trip inspection, is it necessary to check the steps and handrails?
3. Which statement about cargo inspections is incorrect?
4. Can you change lanes while in an intersection?
5. What is not usually inspected when checking the landing gear of a trailer?
6. How do you verify that the bus parking brake is functioning properly?
7. When is the ideal moment to detect leaks or body damage on your bus?
8. Which vehicle types are not legally obligated to stop for a pre-hill inspection?
9. When you're inspecting each fluid during your pre-trip inspection, what are you NOT checking?
10. If you miss a brake pre-hill inspection, what might be the consequence?
11. Why should you walk counter-clockwise around your vehicle while doing a circle check?
12. Is it necessary to check the side and rear view mirrors during the vehicle inspection?
13. How much time should it ideally take to perform a pre-trip inspection for a class 4 vehicle?
14. Why is it crucial to carry out an en route vehicle inspection?
15. Which of the following is not usually performed when inspecting the vehicle's frame?
16. When conducting a pre-trip inspection on the brakes, what are you not required to check?
17. What does a white diamond painted on the road indicate?
18. Which lights on your vehicle require another person to assist in checking?
19. What is not usually checked during inspection of the lights?
20. After loading cargo, how soon should the securement system be re-inspected?
21. What are some of the checks performed during a pre-trip inspection of a bus with storage compartments?
22. How long does a typical pre-trip inspection for class 3 vehicles generally take?
23. Why should commercial vehicles have reflective markings in addition to the required lights and reflectors?
24. A commercial trailer whose overall width is ________ must have reflective markings on the rear and sides.
25. The NSC requires re-inspection on a regular basis during the trip at the earliest of which interval?
26. Which of the following isn't typically checked when inspecting a fifth-wheel connection?
27. Where would you usually find turn control signs?
28. When inspecting drive belts, what are you not looking for?
29. What course of action should you take if a brake check reveals unsafe brake operation?
30. Should construction signs and traffic control personnel be complied with, even if the laws state otherwise?
31. What does "turnout" refer to in road terminology?
32. What is the outcome if your brakes overheat?
33. What does a broken yellow line on the road represent?
34. Are you allowed to drive unregistered vehicles from industrial roads onto public roads?
35. Is it legal to drive over painted traffic islands?
36. What does a lane control signal provide information on?
37. What is the meaning of a green flashing circular traffic light?
38. What is meant by an off-highway endorsement?
39. What is a double yellow broken line an indicator of?
40. In road terminology, what defines an industrial road?
41. When driving towards an object marker sign, which side should you head for?
42. What is required of you when you approach a train crossing with flashing red lights?
43. What is expected of you when you approach a yield sign?
44. On a steep industrial road, which truck should be given the right-of-way?
45. How do industrial roads differ from public roads?
46. If the lane control signals above all lanes are flashing yellow, what should you do?
47. What are you allowed to do when a flashing green arrow with a solid red light is displayed?
48. What purpose does water serve in some commercial vehicles' brakes?
49. Is it permissible to cross a solid white lane marking?
50. Is it common for industrial roads to have runaway lanes?