All Tests Score PageRestart

Your Progress

1
2
3
4
5
  • 0 Correct
  • 0 Incorrect
  • 0 Skipped
8 mistakes allowed to pass
Challenge Bank™
100% of users found this test helpful.
Click a star to add your vote
3 votes • average 5 out of 5
  • Back to all tests
  • Score Page
  • 0 Correct
  • 0 Incorrect
  • 0 Skipped
Restart
 
 
 
 
 
Advertisement
Ask Driving Genie AI
new

    ON Air Brake Test 2 2023

    5 out of 5 • 3 votes.
    Based on 2023 ON commercial driver's license manual Instant feedback

    A commercial truck driver’s licence is required to drive any commercial vehicle in Ontario. There are two types of driving jobs available: owner-operator and employee. If you plan on running your own business or becoming a driver-for-hire, you will need a truck driver’s licence. To receive a trucking licence, you will have to pass two exams: a commercial knowledge exam with multiple-choice questions and a road test, which will test your general driving skills. To help you study for the knowledge test, we have prepared this second practice exam with 40 questions to test your knowledge of driving large vehicles in Ontario. We encourage you to read the hints and explanations provided and check out our sources. You will notice that the questions are slightly more difficult. This is because they start to examine some of the more technical definitions and concepts found in the official 2023 ON commercial driver’s manual. Once you have studied these questions, giving another truck driver practice test a try may be a good idea. Good luck!

    Perfect for:

    • First-time ON commercial license applicants
    • Existing commercial license holders adding endorsements
    • ON commercial license renewal applicants

    What to expect on the actual ON commercial license exam:

    • 25 questions
    • 20 correct answers to pass
    • 80% passing score
    Unlock all questions with Premium

    List of questions (classic view)

    1. If there is a loss of pressure in the trailer supply line, you would expect the trailer brakes to be applied and
    2. If the air pressure reaches 150 psi, the safety valve will open. Where is the safety valve located?
    3. The low air warning device must activate by the time that tank air pressure falls to
    4. Under Ontario law, tank air pressure must not drop below _______ while the vehicle is in operation.
    5. Minimum governor cut-out pressure is
    6. When you test the system air-loss rate of a bus or straight truck, the maximum acceptable leakage rate is 3 psi within
    7. Maximum governor cut-out pressure is
    8. When you test the system air-loss rate, the maximum acceptable leakage rates per minute for a straight truck, a tractor pulling one trailer, and a tractor pulling two trailers are
    9. With the engine idling at _________, air pressure must rise from 85 to 100 psi within two minutes.
    10. Minimum governor cut-in pressure is
    11. The governor cut-in pressure is normally _________ below the cut-out pressure.
    12. Air pressure must rise _____________ with the engine idling at 600–900 rpm within 2 minutes.
    13. Before starting the air brake practical test, make sure that air pressure is at least
    14. The spring brakes will start to apply when the air pressure falls below
    15. A tractor-trailer with one trailer will fail the air-loss rate test if the loss rate exceeds
    16. The trailer air supply valve will close automatically if air pressure in the trailer supply line drops to
    17. A tractor-trailer with two trailers will fail the air-loss rate test if the loss rate exceeds
    18. Before testing the low air pressure warning device, make sure that air pressure is at least
    19. The air-loss rate test can be performed only when
    20. Air compressors can either be driven by the engine belt and pulleys or
    21. The spring brake test is passed if the vehicle
    22. Different sizes of brake chamber on the same axle can cause
    23. To test the air brakes, the vehicle should be parked
    24. In a drum brake, the brake linings are attached to
    25. Where is the air dryer located?
    26. You can usually make a normal stop by applying no more than
    27. The coil spring in most spring parking brake chambers can exert a force of
    28. Spring parking brakes typically require air pressures of at least _______ to completely release.
    29. In the air service circuit, there is a double (two-way) check valve connected to the primary and secondary service tanks. What does this valve do?
    30. In which of the following situations should a spring parking brake chamber be caged?
    31. What is the most frequent reason for placing a commercial vehicle out of service?
    32. How can you check whether the trailer spring brakes have activated?
    33. Which of these vehicles is most likely to be equipped with air brakes?
    34. Where is the air pressure gauge for the service tanks?
    35. Which colour is the trailer supply line?
    36. What can cause the air pressure in the air brake system to drop?
    37. How do you apply the parking brakes?
    38. Your vehicle's air compressor is belt driven. How do you check for correct belt tension?
    39. Which of these is not a part of a drum brake?
    40. When brakes become overheated, they also become